How To Sharpen Chainsaw Chain (Beginners Guide)

Sharpen Chainsaw Chain In Easy Ways

Chainsaws are one of the most versatile tools that you can own. They can be used for a variety of tasks, including cutting down trees, trimming branches, and even carving wood.

However, chainsaws can be dangerous if they are not properly maintained. One of the most important maintenance tasks is sharpening the chain.

If you do not sharpen your chainsaw regularly, the chain will become dull and will no longer cut as efficiently. This can lead to kickbacks and other accidents.

Sharpening a chainsaw is not difficult, but it does take some practice. In this article, we will show you how to sharpen your chainsaw chain in a few easy steps.

How To Sharpen Chainsaw Chain? What Do I Need To File My Chain?

You will need: 

  • A chainsaw chain
  • A chainsaw file
  • A depth gauge tool (optional)
  1. Start by determining which way the cutter teeth are supposed to face. This is typically printed on the body of the saw near the bar or on the bar itself. 
  2. Place the saw chain on the ground or another flat surface so that you can work on it more easily. 
  3. Insert the chainsaw file into one of the cutters, making sure that it’s inserted at the correct angle. The angle will vary depending on your particular saw but is typically around 30 degrees. 
  4. Use a light touch as you file the cutter, applying just enough pressure to remove metal from the surface. 
  5. Continue filing until you’ve reached the desired sharpness. 
  6. Repeat steps 3-5 for each remaining cutter on the chain. 
  7. Once all of the cutters are sharpened, use the depth gauge tool to ensure that they’re all the same height. The depth gauges are typically color-coded, with each color representing a different cutting depth. Match the colors on your depth gauges to those on your saw’s body or bar to get the correct measurement. 
  8. If any of the cutters are too high or low, file them down until they match the rest of the chain.

When To Replace The Chain?

The chain on a chainsaw will eventually become dull and will need to be replaced. Depending on how often the saw is used, the chain may need to be replaced after every few uses, or it may last for several months. 

If the chain becomes too dull, it can cause the saw to kick back, which can be dangerous. In addition, a dull chain will make the saw less effective and more difficult to use. 

To determine if the chain needs to be replaced, try sharpening it first. If the saw doesn’t cut as well as it used to, or if it is difficult to sharpen the chain, then it’s time for a new one.

How Often Should The Chain Be filed?

The general rule of thumb is to file the chain every time you use the saw.

However, if you’re using the saw regularly, you may want to file it more often. If you’re only using the saw occasionally, you can get away with filing it less often.

When in doubt, it’s always better to err on the side of filing the chain more often than not. How often you need to file your chainsaw chain depends on how often you use the saw and what type of wood you’re cutting.

If you’re cutting softwoods, you may not need to file the chain as often as if you’re cutting hardwoods. Softer woods are easier to cut and don’t put as much wear and tear on the chain.

How to set the correct depth gauge?

Most people think that once they have sharpened their chainsaw chain, they can just put it back on the saw and start cutting. However, this is not the case.

It is very important to set the depth gauge correctly after sharpening the chain. If the depth gauge is not set correctly, the chain will not cut properly and can actually damage the saw.

There are two ways to set the depth gauge. The first way is to use a depth gauge tool.

This tool is inserted into the guide bar slot and used to measure the correct distance from the top of the cutter to the bottom of the guide bar slot.

The second way to set the depth gauge is to use a feeler gauge. This method is less precise but will still get the job done.

To set the depth gauge using a feeler gauge, first make sure that the chain is not installed on the saw.

Next, hold the feeler gauge against the top of the cutter and push it down into the guide bar slot.

The correct distance from the top of the cutter to the bottom of the guide bar slot is 0.022 inches (0.55mm).

Once you have set the depth gauge correctly, you can install the chain onto the saw and start cutting.

Remember to check the depth gauge periodically to make sure it has not moved. If it has, simply readjust it to get back to the correct setting.

Related readings:

Proper Chainsaw Cutter Angle

One of the most important things to consider when using a chainsaw is the angle of the blade. The blade’s angle can have a significant impact on both the efficiency of the saw and the safety of the user.

When cutting with a chainsaw, the ideal blade angle is between 30 and 45 degrees. This range provides the best balance between cutting efficiency and safety.

Blades that are angled too sharply (less than 30 degrees) can cause the saw to bind and kick back, which can be dangerous for the operator.

Conversely, blades that are angled too loosely (greater than 45 degrees) will be less efficient and will require more effort from the operator.

The proper chainsaw cutter angle is essential for both safe and effective cutting. Be sure to check the angle of the blade before each use, and adjust it as needed to maintain a safe and efficient cutting operation.

In order to ensure proper cutting performance, it is important to keep the chain properly tensioned.

Alternative Sharpening Methods To Sharpen Chainsaw Chain

There are many different ways to sharpen a chainsaw chain. You may want to use a variety of different sharpening methods to get the best results.

The most common sharpening method is to use a hand-held grinder. Hand-held grinders are very effective and can get the job done quickly.

However, hand-held grinders are also the most dangerous sharpening method. Hand-held grinders can be dangerous because they require you to hold the grinder close to your body while operating it.

This can be extremely dangerous, especially when you are cutting branches or other materials that can fall on you.

Another common sharpening method is to use a bench grinder. Bench grinders are less dangerous than hand-held grinders because they are mounted on a bench or table. However, they are not as effective as hand-held grinders.

The most effective and safest way to sharpen a chainsaw chain is to use a professional sharpening service.

A professional sharpening service will use the best sharpening methods and equipment to give you the best possible results.

Using a chainsaw sharpening kit

Chainsaw sharpening kits come in a variety of sizes, shapes, and designs. Some kits are designed to fit on a stationary bench, while others are designed to fit on a portable belt sander.

There are two main types of chainsaw sharpening kits.

The first type of kit is a bench-mounted kit. These kits typically include a sharpening stone and a number of hand tools, such as a chain puller and a chain clamp.

The kit is placed on a stationary bench and the stone is used to sharpen the chain.

The second type of kit is a portable kit. These kits typically include a sharpening stone and a number of hand tools, such as a chain puller and a chain clamp.

The kit is placed on a portable belt sander and the stone is used to sharpen the chain.

Frequently Asked Questions:

What is the easiest way to sharpen a chainsaw?

There is no definitive answer to this question as it depends on the chainsaw and the sharpening technique that you choose.

Some people prefer to use a sharpening stone, while others prefer to use a sharpening steel. The best way to determine how often you need to sharpen your chainsaw chain is to experiment and find out what works best for you.

Some people prefer to sharpen their chainsaw chain every couple of weeks, while others sharpen their chainsaw chain every couple of months.

Is it worth sharpening a chainsaw chain?

As each chainsaw chain will have a different lifespan and sharpening will only marginally improve performance.

Some chainsaw sharpeners can sharpen chainsaw chains to a very high level of sharpness, but this is not always necessary or even desirable.

Why does my chainsaw chain dull so quickly?

There are a few different reasons why chainsaw chains might dull quickly. One potential issue is that the chain is worn out.

Over time, the teeth on the chain get progressively smaller, which makes the chain harder to move.

Another potential issue is that the chain is not well lubricated. If the chain is not lubricated, it is more likely to start wearing down quickly.

How much does it cost to get a chainsaw sharpened?

Typically, chainsaw sharpeners cost around $10-$20. It will largely depend on the make and model of the chainsaw sharpener that you are looking to purchase.

How to sharpen a chainsaw blade with an electric sharpener?

To sharpen a chainsaw blade with an electric sharpener, first, attach the chainsaw blade to the electric sharpener.

Next, place the chainsaw blade on the sharpener’s grinding wheel and adjust the angle to the desired angle.

For a standard chainsaw blade, use a 15-degree angle. For a carving chainsaw blade, use a 25-degree angle.

Final Thoughts:

Sharpening chainsaws is a necessary maintenance task that needs to be done regularly. But many people don’t know how to sharpen a chainsaw chain. This guide will show you how to do it.

The process of sharpening a chainsaw chain is not difficult. With a little practice, you will be able to sharpen your chainsaw chain quickly and easily.